19.9%
Overall Progress
93
Hours Logged
1
Sub-sections Complete
of 36 total
6
Tasks in Progress
Progress by Section
| Section | Progress | Status | Hours | Tasks |
|---|---|---|---|---|
| Empennage |
|
48.7% | 93.0 | 19 / 45 |
| ↳Horizontal Stabilizer |
|
✓ Done | 47.0 | 5 / 5 |
|
||||
| ↳Vertical Stabilizer |
|
⚠ Issues | 22.0 | 6 / 8 |
|
Dimple vertical stabilizer parts ✓ Done
|
||||
|
Matchdrill FB tip fairing ✓ Done
|
||||
|
Prime vertical stabilizer parts ✓ Done
|
||||
|
Rivet vertical stabilizer ladder ✓ Done
|
||||
|
Rivet vertical stabilizer skins 90%
|
||||
| ↳Rudder |
|
42.9% | 9.0 | 3 / 7 |
|
Matchdrill & Deburr rudder parts ✓ Done
|
||||
| ↳Right Elevator |
|
14.3% | 5.0 | 0 / 7 |
|
Matchdrill & Deburr right elevator parts 50%
|
||||
|
Matchdrill, deburr counterweight parts 50%
|
||||
| ↳Left Elevator |
|
5.6% | 2.0 | 0 / 9 |
|
Matchdrill & Deburr trim servo parts 50%
|
||||
| ↳Elevator Trim Tab |
|
56.3% | 7.0 | 4 / 8 |
|
Dimple elevator trim tab parts 20%
|
||||
|
Prime elevator trim tab parts 30%
|
||||
| Wings | Unstarted | 0.0 | 0 / 17 | |
| Fuselage | Unstarted | 0.0 | 0 / 10 | |
| Engine | Unstarted | 0.0 | 0 / 8 | |
| Finishing Kit | Unstarted | 0.0 | 0 / 10 | |
| Avionics | Unstarted | 0.0 | 0 / 9 | |
| Final Assembly | Unstarted | 0.0 | 0 / 11 | |
Open Issues
Vertical Stabilizer
Rivet vertical stabilizer ladder
Issue
confusion in the drawings and instruction on 2 holes in the lower hinge bracket.
Status
Resolved. Vans is ok with machining countersink on the fwd side and using flush rivets
Last synced: 2026-05-29 12:16:05 GMT-0800 – Data from Notion Build Tracker